BENTLY NEVADA 330780-91-00 3300 XL 11MM PROXIMITY SENSOR

Technical parameter
Measurement type: Proximity displacement/vibration
Probe diameter: 11 mm
Mounting method: DIN rail mounting
Configuration options: 00 indicates the standard configuration
Operating temperature range:
Probe:-51°Cto +177°C(-60°Fto +350°F)
Proximitor module:-35°Cto +85°C(-31°F to +1859F)
Linear range: approximately 2 mm (80 mils)
Sensitivity: 7.87 mV/um(200 mVmil),±£5%
Frequency response: 0 Hz to 10 kHz(typical)
Power supply requirement: -24 VDC (typical value, compatible with a Bently Nevada system)
Housing material: corrosion-resistant stainless stee!
Protection level: IP65 or higher
Feature
High precision measurement
Accurate displacement and vibration data are provided through the 11 mm probe to detect mechanical
unbalance, misalignment or bearing failure
High temperature adaptability
The probe operates stably in environments up to 177°C, making it suitable for high-temperature industrial
scenarios.
System compatibility
Integrates with the Bently Nevada 3500 Series or other monitoring systems to support real-time data
acquisition and alarm capabilities
Flexible installation
DIN rail mounting is designed for easy deployment in control cabinets or limited Spaces.
Upgrade support
Designed to replace the 7200 series, the upgrade requires replacing all components and updating the
monitoring system configuration.
Application scenario
Oil and gas
It is used to monitor the vibration of compressors, pumps and turbines to ensure the safe operation of
equipment in high temperature and high pressure environments.
Power generation industry
It is suitable for condition monitoring of gas turbine, steam turbine or generator to prevent failure and
shutdown
Petrochemical industry
Provide real-time data in high-temperature reactors or rotating equipment to ensure production continuity.
Manufacturing industry
For vibration anallysis of heavy machinery (e.g. fans, rolling mills) to optimize maintenance plans.
Aerospace testing
Monitor vibration during high-temperature test stands or engine tests to ensure equipment performance is up
to standard.

All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the other conditions are needed, Used, Open-box, Refurbished, etc.
Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.
Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.
ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.
GE Fanuc - 90-30; 90-70; PACSystems* RX3i etc.
Honeywell - Experion® PKS;ControlEdge™ HC900;etc.

Many Available just wait for you, feel free to ask to get better deal!!!
Tina
Sales Specialist
[email protected]
+86-13123368748

Conditions	Original Brand New
Approximate Lead Time	3-5 days
Warranty	One Year
Online Service	24 / 7
Express Company	DHL / FedEx / UPS / TNT etc.
MOQ	1 Piece

Allen Bradley - CompactLogix; ControlLogix, Flex I/O, MicroLogix, etc.

Siemens - Simatic S7-300; S7-400; S7-1200; S7-1500; HMI 6AV etc.

ABB - Advant 800xA S800; S200; S400; S500; S600; S700; S900 etc.

GE Fanuc - 90-30; 90-70; PACSystems* RX3i etc.

Honeywell - Experion® PKS; ControlEdge™ HC900; etc.

TZ Tech is not an authorized surplus dealer or affiliate for the Manufacturer of this product.
The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because TZ Tech is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.
While many PLC products will have firmware already installed, TZ Tech makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application.

TZ Tech also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source.
TZ Tech also makes no representations as to your right to install any such firmware on the product.
TZ Tech will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.